Reduce Moisture Of High Efficiency Material Horizontal Sludge Dryer Drying Machine In Rotary Drying Material
Brief Information of Sludge Dryer Drying Machine:
| Dryer Name | horizontal sludge dryer drying machine |
| Dryer Type | paddle sluge dryer drying machine |
| Dryer Color | red, light grey, blue, green, red, etc. |
| Dryer Overall-look | non-standard dryer drying amchine, the overall size is custom-made. |
| Dryer Raw Material | stainless steel, carbon steel or as customers' requirements |
| Heating Source |
(1). steam heating (2). elecltric heating (3). conduction oil heating |
| Heating Medium | common is steam, industrial oil, hot water or cooling water. It is depends on the character of the dry material. |
| Dryer Price |
(1). The price of dryer drying equipment is according to the specific different technical requirements and overall size. (2). What we offer common is the FOB Shanghai price, if indeed, we can also offer the CIF Shanghai and EXW price. (3). The freight price is according to the cargo port, common is Shanghai, because Shanghai port is very close to our factory and service quality. |
| Packing & Shipping | Because of the size and shape of the dryer drying machine, we common tie and hold with the iron wire directly into the shipping container. |
Different materials choose different drying process, choosing the correct drying process is very important. General single stage drum dryer not according to the characteristics of the material to drying out material color difference, sludge is a kind of difficult to dry the material, make out the material inside the skin dry, wet and dry and wet reciprocating fast dryer adopts dc vortex and communication, to make out of good color, material saving resources to improve the efficiency.
Using of Sludge Dryer Drying Machine:
The sludge dryer drying machine mainly consists of the fan, the dispersing device, the belt feeding machine, the feeding machine, the rotary drum, the heat source, the belt type discharging machine, the unloading device and the distribution cabinet. Therefore, the working area of the Vantaa sludge dryer includes the feeding area, the inclined lift plate area, the cleaning area and the guide area.
1. In the guide area, the wet sludge enters the zone and the hot wind contact with the hot air rapidly evaporates. The materials are copied by the large guide Angle, which is not bonded to be imported into the next workspace.
2. In the discharge area, the drum is not set in this area, and the material can roll to the discharge port in this area to complete the drying process.
3. Cleaning area, wet sludge in this area is taking up forming curtain material status, copy board phenomenon of wall material to fall easily formed binding drum, cleaning device is designed in this area due to the equipment, cleaning device was reasonably clean the inner surface adhesion material, in this process, the cleaning device for material group ball agglomerate also plays a role of broken, thus increasing the heat exchange area, and to improve the drying rate;
4. The feed board area, wet sludge in the region has a low moisture state of loose, material in this area has not sticking phenomenon, after heat exchange materials to achieve the required moisture state, in the final discharge area. River channel sludge with a variety of microorganisms has been neglected and has brought many difficulties to urban environmental governance. The sludge drying machine developed by our factory can dry the sludge and facilitate the production of sludge bio-organic fertilizer, which is the preferred drying equipment of organic fertilizer manufacturers.
With the augmentation of the national economic strength, national environmental protection consciousness enhancement, the urban sewage treatment industry gets rapid development, urban sludge yield increasing, sludge disposal and utilization problem is becoming more and more attention by people. The drying of sludge can make the sludge agricultural use, fuel use, incineration and even reduce landfill disposal.
Working principle of Sludge Dryer Drying Machine:
While high viscosity sludge drying equipment generally adopts hot-air swirl dryer drying machine.
Sludge dryer drying machines can be widely used in activated sludge drying, sewage sludge drying, petrochemical sludge drying, papermaking sludge drying, printing and dyeing sludge drying, tanning sludge drying, drying, municipal sludge drying electroplating sludge, biological fermentation mushroom residue and so on all kinds of high moisture materials such as sludge and all kinds of bad slag dryer.
Pre-service:
As a good and rich experience supplier, we should offer customer the best quality and best price of the machine.
1. Introduce the suitable product to the customer in detail, answer the question raised by customer carefully.
2. Make the suitabe project as the customer requirement and make sure the machine is suitable for the material.
Sale service:
(1). Ensure product with high quality and pre-commissioning before delivery. (2). Delivery on time. (3). Provide full set of documents as customer’s requirements.
After-sale service:
Provide considerate services to minimize clients’ worries.
1. Assist clients to prepare for the first construction scheme.
2. Install and debug the equipment.
3. Train the first-line operators.
4. Examine the equipment.
5. Take initiative to eliminate the troubles rapidly.
6. Provide technical support.
7. Establish long-term and friendly relationship.
Service commitment:
1. Provide clients one-year warranty to make sure the machine work well.
2. We always keep certain inventory level of spare parts, which means the replacements can be sent to you timely.
3. Send every client a preferential quotation.
In order to quote you the right drying machine equipment with best price, we would like to get the following information include in your inquiry:
What is the raw material? Material related characteristic? Does it corrosive, strong basicity, or highly acid? Please confirm.
What is the capacity per hour you need (kg/h)?
What is the initial moisture and final moisture of finished products you require to get?
What about the maximum heat temperature of raw material?
What kind of fuel you use to heat the dryer? Natural gas, electricity, fuel oil or steam?
Which equipment material do you like prefer? SUS304, SUS316L or Carbon steel?
Provide us your country’s electricity information, such as phases, voltage, HZ?
How about dust collect requirements?
Other special requirements.
